The chassis, carrier, mask, bridge, rollers, feet and keys are all printed. Each download has ready Bambu Studio projects, plus STLs for other slicers.
Add four O-rings.
Standard 5 × 2 mm nitrile rings, 70A, two on each roller. They’re the only parts you don’t print.
Links are for convenience only. Film Buddy isn't affiliated with these sellers and earns nothing from purchases. Any standard 5 x 2 mm O-ring should work.
A quarter turn holds it.
Four keys lock the stack without screws. Turn them back to swap between 35mm and 120. The chassis, feet and keys stay.
Illustrative render · keys shown in gold
Lit from below by an iPhone in the phone tray.
Pick your film format.
35mm
The chassis, four feet and four keys, with the 35mm carrier, mask, bridge and roller pair.
You print, assemble, and use the enclosure at your own risk. Print quality and assembly vary, so always test with scrap film first. Film Buddy isn't responsible for scratches or other damage to film, negatives, cameras, or other equipment.
You print, assemble, and use the enclosure at your own risk. Print quality and assembly vary, so always test with scrap film first. Film Buddy isn't responsible for scratches or other damage to film, negatives, cameras, or other equipment.
